IVCam turns your Phone/Pad into an HD webcam for Windows PC, which has a much better quality than most webcams and is compatible with all webcam-enabled applications. Replace your USB webcam or integrated webcam now with your Phone/Pad! It’s also a perfect baby monitor, spy-cam, security camera and pet-cam. Download Windows Client Software. It is a WHQL-signed driver and can be used on most all versions of Windows, including Windows 8 and Windows 10. LG Mobile Driver 4.5.0 on 32-bit and 64-bit PCs. This download is licensed as freeware for the Windows (32-bit and 64-bit) operating system on a laptop or desktop PC from drivers without restrictions. LG Mobile Driver 4.5.0 is.
-->This topic provides guidance to Mobile Broadband (MB) module manufacturers intending to support firmware upgrade devices via Windows Update (WU). The devices must be compliant with the USB NCM Mobile Broadband Interface Model (MBIM) V1.0 specification released by the USB-IF Device Working Group.
The information in this topic applies to:
- Windows 8
Device Requirements
To support firmware updates on Mobile Broadband using Windows Update, module or device manufacturers need to comply with the following requirements:
- UMDF (User Mode Driver Framework) based driver developed by the module or device manufacturer, packaged along with the INF file and firmware payload. Sample INF file and details are provided in the later part of this document
- Device firmware to implement the following functionalities:
- Firmware ID Device Service (FID). For more information, see FID Device Service.
- Firmware to support a firmware update device service. This is a device manufacturer specific device service that provides the ability for an UMDF driver to call into and execute/download the firmware payload and start the firmware update process.
Operational Overview
The following diagram shows the high level design and interaction between the three components involved: MBIM device, Windows 8 Operating System and IHV supplied firmware upgrade driver.
- When the WWAN Service detects the arrival of new MB device, it will check if device support Firmware ID (FID) Device Service. If it is present, it will retrieve the FID, which is defined to be GUID. The Firmware Device Service specification that the IHV needs to the support on the device is described below.
- WWAN Service (Windows OS) will generate “soft device-node” using the FID obtained above as the device hardware Id. This referred to as “Soft Dev Node” in the diagram above. The creation of the dev-node will kick start PnP subsystem (Windows OS) to find the best matched driver. In Windows 8, PnP system will first attempt to install a driver from the local store, if one is available, and in parallel OS will attempt to fetch a better matched driver from WU. The inbox NULL driver will used be used as default if better match driver is not available to eliminate “Driver Not Found” issue.
- The IHV WU package, based on the FID match, is pulled down to the machine and installed. It is expected that the FID represents a unique firmware SKU (uniqueness here is defined by combination device VID/PID/REV and MNO). WU package would contain an IHV authored UMDF driver as well as a firmware payload.
- Once the IHV UMDF is loaded on the soft dev-node it is responsible for controlling the firmware update flow. It should be noted that the life time of the soft dev-node is tied to physical presence of the MBIM device. The UMDF driver shall perform the following steps to performing firmware updates
- It is acceptable for the device to reboot multiple times during the firmware update process, but would cause the UMDF driver to get unloaded/reloaded
- The entire firmware upgrade process, including reboots, should take place no more than 60 seconds.
- After the firmware update is completed and device has reverted to MBIM mode, Windows should be notified. This is done by clearing the previously set DEVPKEY_Device_PostInstallInProgress property. https://msdn.microsoft.com/library/windows/hardware/hh451399(v=vs.85).aspx describes how to set a property on dev-node. A previously set property can be cleared using DEVPROP_TYPE_EMPTY.
- During OnPrepareHardware UMDF callback, the UMDF driver shall check if the firmware on the device needs to be updated. This is done by comparing the version of the firmware on the device against the one that came in via Windows Update. Additional guidance is provided later in the document regarding placement location of firmware binary. If firmware update is required, the UMDF driver should:
- Schedule a work-item as described in https://msdn.microsoft.com/library/windows/hardware/hh463997(v=VS.85).aspx. The actual firmware upgrade happens in the context of the work-item.
- Once the work-item is successfully scheduled, notify Windows about the start of firmware update. It is done by setting the DEVPKEY_Device_PostInstallInProgress property on the soft dev-node in the context of OnPrepareHardware UMDF callback.
- It is important not to block the OnPrepareHardware callback while the firmware update is in progress. It is expected that OnPrepareHardware callback is completed within a second or two at the most.
Sample INF file for the WU Package
This section provides a sample INF that is part of the WU package. The key points to note in INF file are:
- The firmware binaries are independent of the UMDF driver.
- The firmware binaries are located a well-known, pre-defined location as shown below to filename collisions. The binaries cannot be not be executable files containing PE/COFF headers.
%windir%Firmware<IHVCompanyName><UniqueBinaryName>.bin- The UMDF driver is aware of this predefined well-known location.
- The sample INF template below has highlighted items that need to be filled by the IHV.
Firmware Identification Device Service (FID Device Service)
The MBIM compliant device will implement and report the following device service when queried by CID_MBIM_DEVICE_SERVICES. The existing well-known services are defined in the NCM MBIM spec in section 10.1. Microsoft Corporation extends this to define the following service.
Service Name = Microsoft Firmware ID
UUID = UUID_MSFWID UUID
Value = e9f7dea2-feaf-4009-93ce-90a3694103b6
Specifically, the following CID is defined for UUID_MSFWID device service:
CID = CID_MBIM_MSFWID_FIRMWAREID
Metrologic driver download for windows. Command Code = 1
Mobile Stream Driver Download For Windows
Query = Yes
Set = No
Event = No
Set InformationBuffer payload = N/A
Query InformationBuffer payload = N/A
Completion InformationBuffer payload = UUID
CID_MBIM_MSFWID_FIRMWAREID
The command returns the MNO or IHV assigned Firmware ID for the device. The UUID is encoded based on the guidelines in the MBIM specification. Download matica driver.
Query = InformationBuffer on MBIM_COMMAND_MSG not used. UUID returned in InformationBuffer MBIM_COMMAND_DONE.
Set = Unsupported
Unsolicited Event = Unsupported
Code snippets for behavior of UMDF driver
Mobile Stream Driver Download For Windows 8.1
As indicated earlier, the UMDF driver should indicate to the Windows when it starts and completes firmware upgrade. This section provides code snippets that show how the driver should notify Windows of these events.